Replace Troublesome Solenoid Valve with Ball Valve without Running More Wire
Replace problematic solenoid valve with full port ball valve
Replace problematic solenoid valve with a ball valve and not have to run more wires. Most ball valve electric actuators require additional conductors to reverse the motor. We can replace your solenoid valve with a electric ball valve and you can use your existing wiring. Your ball valve will still fail open or closed. Ball valve does not need line pressure to operate. Electric ball valve actuator has manual override in case of power loss, you can still manually operate the valve. Electric ball valve actuator also has 2 auxilliary contacts that can be wired into an interlock circuit, plc controller, dcs system, alarms, trouble lights, etc. Actuator is water tight NEMA4 and Corrosion Resistant NEMA4X.
Brass 2 Way Full Port Ball Valve with Electric Actuator 8E064-012-pipe size 24vdc, 24vac
8E064-013-pipe size 100-240 vac, includes 110vac, 115vac, 120vac
Stainless Steel 2 Way Full Port Ball Valve with Electric Actuator 8E067-012-pipe size 24vdc, 24vac 8E067-013-pipe size 100-240 vac, includes 110vac, 115vac, 120vac
Specify Fail Open or Fail Closed
A full port ball valve will likely have 4 or more times the flow rate than a solenoid valve. You may be able to reduce your valve size and lower your cost by switching to a full port electric ball valve.
Many other valves and actuators available including 3 way, stainless steel, flanged and more.
If you want to know more about our product, call David Sheffield at 1-888-813-6331 Toll Free in US or 763-476-1013.